Denon SC6000M PRIME, User Manual, Page: 18 / 88

18
Cues/Loops
•
Cue / Loop Quantization : This setting determines the degree of quantization for time-based features: hot cue
points, loops, and loop rolls. Select 1 / 8 beat, 1 / 4 beat, 1 / 2 beat, 1 beat, or 4 beats.
•
Paused Hot Cue Behavior : This setting determines how pads will play their hot cue points. When set to
Momentary , playback will start from a hot cue point when you press and hold its pad—release the pad to return
to the hot cue point. When set to Trigger , playback will start from a hot cue point (and continue) when you
press and release its pad.
•
Default Loop Size : This setting determines the default size of an auto loop when you load a new track to the
deck: 1 , 2 , 4 , 8 , or 16 beats.
•
Smart Loops : This setting determines whether or not a manual loop will be automatically expanded or reduced
to a conventional length (e.g., 2 beats, 4 beats, 8 beats, etc.) when you set it. Select On or Off . This setting
works independently of the quantization setting.
•
Move Cue To Loop In: This setting determines whether the song's initial Cue Point will automatically be moved
to the start of a loop ( On ), or remain at its current point ( Off ).
Display
•
Track Title: This setting determines whether tracks titles are shown as the track's Filename or its embedded
Metadata (tags).
•
Time Format : This setting determines whether or not pitch adjustment affects how the track time is displayed.
When set to Static , the track’s time corresponds to locations in the track as usual; adjusting the pitch does not
affect it. When set to Dynamic , the track’s time will automatically adjust to account for changes in pitch. For
instance, if you set the pitch fader to -8% , the track time will increase so it is 8% longer.
•
Track End Warning : This setting determines how long before the end of a track SC6000M PRIME will warn you
that it is nearing the end. If the track is on the currently selected layer, the platter ring and track overview will
flash. If the track is on the opposite layer, the Layer button will flash.
•
On Air Mode: This setting changes the platter ring illumination when the channel fader on the Denon DJ mixer is
up or down, indicating an active or "on air" deck. When this setting is On , raising the channel fader will change
the platter color from white to the selected color. When this setting is Off , the user-selected color will always be
shown regardless of the channel fader position.
Safety
•
Lock Playing Deck : This setting determines whether or not you will be able to load a track to the deck as it is
playing. Select On or Off . When this setting is on, the deck must be paused in order to load a track to it.
•
Needle Lock : This setting determines whether or not you can tap the track overview in the display to jump to that
location in the track during playback. Select On or Off . You can use the track overview while playback is stopped
regardless of this setting. Alternatively, if Needle Lock is On and Motor is On , stopping the platter with your hand
or palm will allow you to swipe through the track overview.
•
Pad Lock : This setting determines whether the pads and pad mode buttons ( Hot Cue , Loop , Roll , Slicer ) are
enabled or disabled. Select On or Off .
Library
•
Key Notation : This setting determines how the track key is notated in the display. You can view the key as all
Sharps , all Flats , Open Key , or Camelot .
•
Key Filter : This setting determines whether the Key filter shows tracks with the same key only ( Match ) or tracks
with compatible keys ( Compatible ).
•
BPM Range : This setting determines the lowest- and highest-possible BPM values that will be used when
tracks are analyzed: 58 – 115 , 68 – 135 , 78 – 155 , 88 – 175 or 98 – 195 BPM.
•
BPM Filter Tolerance : This setting determines the “tolerance” of the BPM filter so you can include tracks with
tempos that are within a small range of the selected tempo. Select +0 , 1 , 2 , 3 , 5 , 10 , or 15 .
Deck Colors
•
Deck Colors : These settings determine the colors of the light ring around the platter for each layer on each
player. Tap the arrow next to A or B to select the layer, and then tap a color to select it. The light ring will
change color immediately. Tap the X to return to the previous screen.