24
Syncing & Pitch Adjustment
To activate sync
, press
Sync
on the unit that you want to control the BPM, which becomes the “sync lead.”
After Sync is activated on that unit, press
Sync
on any additional units. The tempo of each unit will
immediately synchronize to match the tempo of the sync lead unit.
The Sync state icon in the display will indicate the current status:
•
Sync Off
•
Sync On
The Sync behavior is determined by the
Sync Mode
setting in the
The Sync Lead icon in the display will indicate the current sync lead status:
•
Sync Lead
•
Sync Follow
To deactivate sync on an SC5000 PRIME unit
, press
Sync
again, or press and hold
Shift
and press
Sync
.
To set a different SC5000 PRIME unit as the master
, press
Master
. All connected SC5000 PRIME units
with Sync activated will use the tempo of this unit. You can also tap
Sync Lead
on the touchscreen
to
select which layer on the primary unit is used for sync.
To adjust the track’s pitch
, move the
pitch fader
. You can do this only when the deck is not synced.
Important
: If Sync is activated, moving the pitch fader on the “primary” SC5000 PRIME unit will change the
speed of all synced units, while moving the pitch fader on other units will do nothing.
To adjust the track’s pitch momentarily
, press and hold one of the
Pitch Bend
–
/
+
buttons.
To adjust the range of the pitch fader
, press and hold
Shift
and press one of the
Pitch Bend
–
/
+
buttons
to select
+4%
,
8%
,
10%
,
20%
,
50%
, or
100%
.
To reset the track’s pitch to 0%
, press and hold
Shift
and press
Key Lock
/
Pitch Reset
. The track’s pitch
will return to its original pitch (
0%
) regardless of the position of the pitch fader.
To adjust the track's key,
tap the key on the
touchscreen
to open the
Key Change Menu
.