6
Setup
1. Assemble the Platter System (SC5000M Only)
1.
Remove the SC5000M base from the packaging. Remove the platter assembly from the package
(underneath SC5000M). Place SC5000M on a flat, stable surface for assembly and operation.
2.
Place the platter onto the SC5000M base by aligning the pins in the bottom of the
platter with the holes in SC5000M’s motor. Press it down firmly. Check to make sure
that it rotates uniformly and does not wobble excessively.
3.
Place the slipmat onto the platter, then place the vinyl over the slipmat.
4.
Line up the notch in the spindle with the screw in the spindle lock adapter. Use the allen
wrench (included) to tighten the screw, locking the adapter to the spindle.
Note:
By pressing down on or lifting up the vinyl while you tighten the spindle screw,
you can adjust the slip friction to your preferred feel.
2. Connect and Start DJing!
Important:
Occasionally, we may update PRIME’s firmware to add exciting new features and improvements.
Visit
to check for available firmware updates, especially after you update your
software (firmware updates may address new software features).
1.
to download the Engine DJ software.
2.
Double-click the
.exe
(Windows
®
) or
.dmg
(macOS
®
) installer file you downloaded, and then follow the
on-screen instructions to install Engine DJ.
3.
Make sure all of your devices are powered
off
or all of their volume levels are at their
minimum
positions.
4.
Connect PRIME’s audio outputs (
Layer
A
/
B
or
Digital Outputs
A
/
B
) to the inputs of your mixer.
5.
Connect PRIME’s
Link
ports according to one of the following connection diagram examples.
6.
Connect any output devices (turntables, headphones, power amplifiers, loudspeakers, etc.) to the outputs of
your mixer.
7.
Connect all of your devices to power sources.
•
When starting a session, power on (
1
) PRIME hardware and other input sources, (
2
) your mixer, and
then (
3
) output devices.
•
When ending a session, power off (
1
) output devices, (
2
) your mixer, and then (
3
) PRIME hardware
and other input sources.
8.
To use Engine OS
(standalone playback)
:
Insert a USB flash drive or SD card (with an Engine-configured
music library) to one of PRIME’s
USB ports
or
SD Card Slot.