34
Tap the
Preferences
tab
at the top of the touchscreen to open the Engine Lighting preferences.
General
•
Engine Lighting Status
: This setting displays the current connection status to Engine Lighting devices.
When
Running
is shown, Engine Lighting is active. Tap
Stop
to deactivate Engine Lighting. Tap
Start
to
reactivate.
•
Connection Status
: These indicators will show whether Engine Lighting is receiving signal from up to
four connected players.
•
Sync Offset
: Use this slider to apply a time offset for syncing your connected lights, from -
1
to
0
to
+1
seconds.
•
Show Advanced Controls
: Enable this option to toggle between the
Basic
and
Pro
controls.
•
Randomize Autoloops
: This setting determines whether autoloops are randomized or play in order.
•
Override Scripted Tracks
: This setting determines whether a scripted track that is paired with an audio
file is used (
Off
) or whether you can override it using the onboard controls (
On
).
•
Loop Auto Strobe
: This setting allows you to automatically generate strobe effects when a Loop Roll is
engaged.
•
Broadcast Art-Net
: This setting allows you to enable or disable sending Art-Net protocol to control
DMX interfaces over a network connection.
•
Strobes
: This setting determines whether strobe effects are enabled or disabled.
•
Philips Hue
: Enable this option to connect to available Philips Hue Smart devices.
•
NanoLeaf
: Enable this option to connect to available NanoLeaf devices.
•
Player Mode
: This setting allows you to set whether you are using
2 Player
or
4 Player
operation.
•
Active Faders
: This setting allows you to enable or disable Engine Lighting control on up to four
channels at a time. Tap the
CH1–CH4
names to activate each channel.
DMX Interfaces
Use this menu to view connected DMX interfaces and their Universe Assignments.
Philips Hue
Use this menu to set up Philips Hue devices.
NanoLeaf
Use this screen to set up NanoLeaf devices.