17
Editing Crates and Playlists
Tap the
edit button
at the top of the display while viewing the
crates or playlist screen. While editing is active, you can do
any of the following:
•
To make a new crate,
tap
+ Create Crate
in Crates view.
•
To make a new playlist,
tap
+ Create Playlist
in Playlist
view.
•
To make a new folder,
tap
+ Create Folder
in Playlist
view.
•
To add tracks to your crate or playlist,
tap a track to
select it, and the open circle will become filled. After
selecting tracks, tap and hold to move the tracks. You can
drag the tracks over a crate, playlist or folder and release
your finger to instantly add them.
•
To reorder tracks in a playlist,
tap and hold on the track
name (while editing mode is still active), then move your
finger up or down to change the track order. You can also
reorder playlists in the same way.
Playback & Cueing
To play or pause a track
, press
Play
/
Pause
(
/
).
To scratch a track
, move the
platter
when the
Vinyl
button is set to
On
and audio is playing.
To set the initial cue point
, press
Shift
+
Cue
at the desired location during playback.
To return to the initial cue point and stop
, press
Cue
. The button will flash while the unit is paused at the cue point.
To return to the initial cue point and keep playing
, press
Shift
+
Play
/
Pause
(
/
).
To jump to a specific location in the track
:
•
If Needle Lock is
disabled
: tap the desired location in the track overview.
•
If Needle Lock is
enabled
: pause playback and then tap the desired location in the track overview.
Alternatively, make sure the
platter
is in
Vinyl
Mode (press the
Vinyl
button so it is lit) touch the top of the platter
and tap the desired location in the track overview.
To zoom in and out of the waveform
, place two fingers on the display and spread them apart or pinch them together.
Tap to Enable
Editing
Tap to Create New
Playlist, Folder, or Crate
Tap, Hold & Drag
to Move Tracks
Tap to Select
Tracks