11
Front Panel
1.
Headphones
(
1
/
4”, 1
/
8”
)
(
6.35 mm, 3.5 mm
)
:
Connect your 1/4” or 1/8” (6.35 mm or 3.5 mm) headphones to this output
for cueing and mix monitoring. The headphone volume is controlled using the
Phones Level
knob.
2.
Cue Mix:
Turn this knob to adjust the blend of the pre-fader and master channels together in the headphones.
3.
Phones Level:
Turn this knob to
adjust the volume level in your headphones.
4.
Aux Level:
Turn this knob to
adjust the volume level of the
Auxiliary input
.
Note:
The Auxiliary input signal is only sent to the
Master Outputs
.
5.
SD Card Slot:
Insert a standard SD card to this slot. You can use the touchscreen to select and load tracks from your SD
card.
Rear Panel
1.
Power Input:
Use the included power adapter to power the unit or charge the internal lithium-ion battery.
2.
Power Button:
Press this button to power PRIME GO on. Power on PRIME GO only
after
you have connected all of your
input devices and
before
you power on your amplifiers and loudspeakers.
To power off PRIME GO, press this button and follow the prompts on the touchscreen. Power off your amplifiers and
loudspeakers
before
powering off PRIME GO.
3.
Rear USB Port:
Connect a standard USB drive to this USB port. When you select a USB drive as a source, you can use
the touchscreen to select and load tracks from your USB drive.
4.
USB B:
Use a standard USB cable (included) to connect this USB port to an available USB port on your computer.
Note:
Although PRIME GO can play tracks that have not been analyzed yet, pre-analyzing them allows its features to work
most effectively. We recommend using the Engine Prime software to configure your music library on your SD card or USB
flash drive before connecting to PRIME GO.
5.
Link Port:
Use a standard Ethernet cable to connect this port to a computer. PRIME GO will send time, BPM, and other
track data to the compatible Stagelinq lighting and video software over this connection.
6.
Booth Outputs
(
1/4”
/ 6.35 mm
)
:
Use standard 1/4” (6.35 mm) cables to connect these outputs to booth monitors or a
booth amplifier system. Use the
Booth
Level
knob on the top panel to control the volume level.
7.
Master Outputs
(
XLR, balanced
)
:
Use standard XLR cables to connect these outputs to loudspeakers or an amplifier
system. Use the
Master
Level
knob on the top panel to control the volume level.
8.
Master Outputs
(
RCA, unbalanced
)
:
Use standard RCA cables to connect these outputs to loudspeakers or an amplifier
system. Use the
Master
Level
knob on the top panel to control the volume level.
9.
Stereo
/
Mono:
Use this switch to set the channel configuration of the
Master Outputs
:
Stereo
(binaural audio using
separate left and right channels) or
Mono
(summed monaural audio through both left and right channels).
10.
Aux Inputs
(
RCA, unbalanced
)
:
Use standard RCA cables to connect these line-level inputs to an external audio source.
Use the
Aux Level
knob on the top panel to control the volume level.
11.
Mic Inputs
(
XLR or 1
/
4”
/
6.35 mm
)
:
Use standard XLR or 1/4” (6.35 mm) cables (not included) to connect standard
dynamic microphones to these inputs. Use the
Mic 1
and
Mic 2 Level
knobs on the top panel to control the volume level.
12.
Kensington
®
Lock Slot:
Use this slot to secure PRIME GO to a table or other surface.
1
2 3 4 5
1
2
3
4
5
6
7
8
9
10
11
12