Selecting the speakers for audio output
1
Use SPEAKERS A/B on the main unit to select the
speaker system to be used for playback.
0
If either SPEAKERS A or SPEAKERS B is “ON (
Z
)”, audio is output from the
associated speaker terminals.
0
If both SPEAKERS A and SPEAKERS B are “ON (
Z
)”, audio is output from both
of the speaker terminals. When using bi-wiring connections, turn both SPEAKERS
A and SPEAKERS B “ON (
Z
)”.
0
If both SPEAKERS A and SPEAKERS B are “OFF (
Y
)”, no audio is output from
the speaker terminals. Turn SPEAKERS A and SPEAKERS B “OFF (
Y
)” when
using headphones.
Selecting the input source
1
Press the input source select button to be played back.
The indicator of the selected input source lights.
0
You can also select the input source by turning INPUT SELECTOR on the main
unit.
Adjusting the volume
1
Use VOLUME
df
to adjust the volume.
0
You can also adjust the volume by turning VOLUME on the main unit.
26
