Denon PMA-150H, Owner'S Manual

Page: 124 / 145

Music files on PC or Mac cannot be played back (USB-DAC)
This unit is not recognized on the computer.
0
Reconnect the USB cable to the USB port on your computer. When this unit is still not recognized after reconnection, connect to a different USB port.
(
v
p. 26)
0
Restart your computer.
0
Check the OS of your computer. (
v
p. 65)
0
When your computer is running on Windows, a dedicated driver software should be installed. (
v
p. 65)
This unit is not selected as the playback device.
0
Select this unit as the playback device in the sound settings on the computer. ( v p. 64)
“Signal Unlock” is displayed.
0
When digital audio signals cannot be detected properly, “Signal Unlock” is displayed. (
v
p. 73)
“Unsupported” is displayed.
0
“Unsupported” is displayed when audio signals that are not supported by this unit are input. Check the settings on your computer or player software.
(
v
p. 73)
0
If the your computer is running a macOS, make sure the “PMA-150H” format is set to “384000.0 Hz” or less in “Audio MIDI Setup”. (
v
p. 73)
Contents Connections Playback Settings Tips Appendix
124
Front panel Rear panel
Remote control
unit
Index