Denon M-CR612, Owner'S Manual

Page: 94 / 157

Speaker Configuration
The speaker output characteristics are changed and settings are
configured according to your speakers.
o
Amplifier Mode
This unit is loaded with 4 channels of output (SPEAKERS A (L/R),
SPEAKERS B (L/R)), for a maximum of two sets of speakers that
support a variety of playback methods. Connect and set up the
speakers for your preferred playback method in advance.
Standard (A, B, or A+B)
(Default):
When either SPEAKERS A terminals or
SPEAKERS B terminals are connected
(“Connecting speaker A (Standard
connection, Parallel BTL)” (
v
p. 23),
“Connecting speaker B” (
v
p. 24)) and
when both SPEAKERS A and B terminals
are connected as 2 sets of speakers in a
multi-drive connection, set (
v
p. 83).
Parallel BTL:
The speakers for each channel are driven
by four amps built into this unit, and this is
effective for parallel BTL function which
realizes sound quality with damping
force. Set when speakers are connected
to the SPEAKERS A terminals.
(
v
p. 23)
0
Do not connect a speaker to the
SPEAKERS B terminal when “Parallel
BTL” is set.
Bi-Amp:
Enables the bi-amp function. Set when
bi-amp is connected. (
v
p. 25)
Contents Connections Playback Settings Tips Appendix
94
Front panel Rear panel
Remote control
unit
Index