Denon M-CR612, Owner'S Manual

Page: 123 / 157

Desired sound does not come out
The volume does not increase.
0
The maximum volume is set too low. Set the maximum volume using “Volume Limit” on the menu. (
v
p. 93)
Headphone volume is low.
0
Switch “H/P Amplifier Gain” to “High” if using headphones with high impedance or low sensitivity.
(
v
p. 93)
Left/right volume balance is unbalanced.
0
Press the DBB/TONE button on the remote control to adjust the “Balance”. (
v
p. 80)
No sound is produced from subwoofer.
0
Check the subwoofer connections. (
v
p. 23)
0
Turn on the subwoofer’s power.
Set values are not reflected in “Dynamic Bass Boost”, “Bass” and “Treble”.
0
“Dynamic Bass Boost”, “Bass” and “Treble” setting values are not reflected in audio out or subwoofer out.
0
Press the DBB/TONE button on the remote control to set “Source Direct” to “Off”. (
v
p. 80)
Contents Connections Playback Settings Tips Appendix
123
Front panel Rear panel
Remote control
unit
Index