Speaker is turning off automatically
Speaker is turning off automatically.
0
To save battery power, the speaker is designed to turn off when no audio is played via Bluetooth for approximately 15 minutes. Power on the speaker
by pressing and holding the power button for 2 seconds. (
0
If the input of Envaya is set to AUX for approximately 8 hours, Envaya automatically turns off. Power on the speaker by pressing and holding the power
The power turns off quickly.
0
If usage time is extremely short even when the battery has been fully charged, the battery may be near the end of its life. In this case, please contact
Denon service center.
Speaker is malfunctioning
Speaker is malfunctioning.
0
To reset the speaker, turn on the speaker then, press and release the
T
,
X
and
V
button simultaneously.
Envaya is reset. (Note: The battery protection circuit activates after resetting. To restart this unit, charge the battery)
0
The speaker needs to be reset to the factory default settings. Turn on the speaker. Press and hold the , VOLUME- and
T
buttons together for
approximately 5 seconds.
(Note: All pairing information from Bluetooth devices will be erased. The battery protection circuit activates after resetting. To restart this unit, charge the
battery).
Cannot conduct a call
Cannot conduct a call
0
Not all mobile phones and Apps support Hands-free phone calling.
31
