Denon Envaya DSB-150BT, Owner'S Manual

Page: 29 / 42

No sound from the speaker
No sound from the speaker.
0
The speaker is not connected to USB to AC power adapter or the battery is not charged. Connect power and turn on the speaker. (
v
p. 14)
0
The volume is too low on your connected device. Turn up the volume on your device to about 90 % and then adjust the volume on the speaker.
(
v
p. 22)
0
There is no connected Bluetooth device. Pair and connect a Bluetooth device and try again. (
v
p. 15)
0
There is no connected AUX device. Connect an audio device to the AUX input using a stereo 3.5mm cable and make sure music playing music on your
device. (
v
p. 23)
0
The AUX input connector of Envaya is compatible with stereo mini plug cables that have 3-conductor plugs. Be sure to use a 3-conductor stereo mini
plug cable. (
v
p. 23)
Sound is distorted, noisy, or cuts in and out
Sound is distorted, noisy, or cuts in and out.
0
The volume is too low on your connected device. Turn up the volume on your device to about 90 % and then adjust the volume on the speaker.
(
v
p. 22)
0
The Bluetooth device is out of range. Bring the Bluetooth device closer to the speaker.
0
The Bluetooth connection is experiencing wireless interference. Move the speaker away from appliances such as microwave ovens and other wireless
devices.
0
The Bluetooth device is having connectivity issues. Cycle the power on the Bluetooth and reconnect to the speaker.
0
Depending on the type of USB to AC power adapter connected to Envaya, a small amount of noise may occur during charging. This is not a
malfunction.
Contents Preparation Connections Operation Troubleshooting Appendix
29
Index