Denon DRA-100, Service Manual

Page: 17 / 98

SPECIAL MODE
Special mode setting button
b
No. 1 - 12 ： Insert the AC plug while pressing button "
A
", and wait for more than 3 seconds.
Select the mode using the "
CURSOR
d
" and "
CURSOR
f
" buttons, and press the "
Enter
" button to enter.
b
No. 13 - 15 ： Insert the power plug while pressing button "
A
", and wait for more than 3 seconds.
b
No. 14 ： Insert the power plug while pressing buttons "
A
" and "
B
" together, and wait for more than 3 seconds.
Press and hold the respective buttons to enter your desired mode until the "
Standby Indicator
" button lights up.
No. Mode Button A Button B Descriptions
1 Factory Update Mode X
Mode used to overwrite the firmware during production.
This is not used during servicing.
2 MAC address rewrite mode
X
MAC address rewrite mode
This is not used during servicing.
3 Version Display Mode X
The firmware version is shown on the display.
( See page 20 )
4 Product mode 1
X
Mode used during production.
This is not used during servicing.
5 Product mode 2 X
Mode used during production.
This is not used during servicing.
6 Protection history display mode
X
Displays the protection occurrence history.
( See page 22 )
7 DPMS forced up date mode X
Mode used for development.
This is not used during servicing.
8 Access to development server mode
X
Mode used for development.
This is not used during servicing.
9 Touch Sensor update up date mode X
Mode used to update the touch sensor firmware.
( See page 29 )
10 CY920 rewrite mode
X
Mode used during production.
This is not used during servicing.
11 USB Update mode X
Switches this unit to USB Update mode.
( See page 25 )
12 User Initialization Mode X
The following 3 points are different from the Factory Reset.
•Does not clear the version information such as rewriting failed log.
•Does not clear the history of protection.
• Network devices are started and initialized. ( See page 19 )
13 Forced USB All Device Write Mode WPS
Mode used when this unit cannot be recovered.
Forcibly switches this unit to USB update mode.
( See page 27 )
14 Factory Initialization Mode iOS WPS
Restores to the default settings.
b
The Recently Played list will not be initialized.
b
Be sure to do the "User Initialization" after the "Factory Initializa-
tion".
d
CURSOR X
iOS WPS
17