Denon DNP-800NE Service Manual Download Page 45

Page: 45 / 65

5. Audio is not output during USB file playback, server file playback, internet radio or Bluetooth playback due to a problem in the digital

circuit

Before testing circuit operation, check if the file to be played back is in a supported format and network settings are correct.

Check output of digital audio waveform during audio file playback or streaming.

MAIN PCB

LEGO Module[

U507] : [L505]LRCK, [L504]BCK, [L503]DATA

Check output of digital audio waveform.

MAIN PCB

PLD[

U501] : [R583]BCK/DBCK, [R582]LRCK/DSD_DATAL, [R581]PCM_DATA/DSD_DATA

Check each part listed after "

4. Audio is not output due to a problem in the analog circuit (Line Out,

Variable Out, H/P Out)

There is a malfunction in the communication between the following areas or in LEGO Module.

LEGO Module[

U507] and SYSTEM uCOM[U503]

If no abnormality is found in the communication waveform, replace LEGO Module[

U507].

There is a malfunction in the communication between the following areas or in PLD[U501].

PLD[

U501] and SYSTEM uCOM[U503]

If no abnormality is found in the communication, replace PLD[

U501] or MAIN PCB.

Check output of digital audio waveform.

MAIN PCB

FPGA[IC501] : [R584]BCK,[R589]WCK/DSD_R, [R586]DATA_L, [R587]DATA_R

There is a malfunction in the communication between the following areas or in FPGA[IC501].

There is an abnormality in the communication. Replace FPGA[IC501] or MAIN PCB.

Before Servicing

This Unit

Electrical

Mechanical

Repair Information

Updating

Summary of Contents for DNP-800NE

































































Search results

Summary of Contents for DNP-800NE

Reviews:

Brands by name

Popular brands

Denon DNP-800NE, Service Manual

Search results

Summary of Contents for DNP-800NE

Reviews:

Brands by name

Popular brands