Denon DN-MCX8000, User Manual, Page: 5 / 51

5
Setup
Important: Occasionally, we may update MCX8000’s firmware to improve its performance.
Visit denondj.com to check for available firmware updates, especially after you update your
software (firmware updates may address new software features).
Note: Items not listed under the Introduction > Box Contents are sold separately.
1. Visit denondj.com and log into your account. (Create an account if this is your first Denon
DJ product.)
2. In your account, download and install the latest versions of Engine and Serato DJ.
3. Windows users only: In your account, download and install the latest Windows driver.
4. Connect input sources (microphones, CD players, etc.) to MCX8000.
5. Connect output devices (headphones, power amplifiers, loudspeakers, etc.) to MCX8000.
6. Plug all devices into power sources, and turn on devices in proper order:
•
When starting a session, turn on ( 1 ) input sources, ( 2 ) MCX8000, ( 3 ) output devices.
•
When ending a session, turn off ( 1 ) output devices, ( 2 ) MCX8000, ( 3 ) input sources.
7. To use Serato DJ: Using a Hi-Speed USB 2.0 cable (included), connect the USB port on
MCX8000 to your computer. Open Serato DJ and go! For more information on how to use
Serato DJ with MCX8000, visit
serato.com / dj / support and select Denon DJ MCX8000 .
To use Engine (standalone playback) : Insert a USB flash drive (with an Engine-configured
music library) to one of MCX8000’s USB ports .
Computer
Monitors
Powered Loudspeakers Microphone
Headphones
(to front panel)
Power
Audio Player
(smartphone,
tablet, etc.)
Hard Drive
(This hub will connect to
your computer; you cannot
access its content using
MCX8000.)
Turntable,
CD Player, etc.
USB Flash Drive
(on top panel)