q
,
w
r
-
i
Q1
-
Q7
r
-
i
Q1
-
Q7
W2
-
W4
R8
R8
e
E7
,
E8
E7
,
E8
Q8
R7
R77
Q9 e
q
,
w
r
-
i
Q1
-
Q7
r
-
i
Q1
-
Q7
E7
-
E8
E7
-
E8
R0
,
R9
Q8
Q9
e
e
R8
R8
R7 R7
• Please use Main volume, Headphones volume, and Headphones
mix knobs on TRAKTOR for these controls when the
Mixing Mode is set to “Internal” in TRAKTOR’s Output Routing.
DN-MC6000 Quick Guide
for TRAKTOR
Function table
DN–MC6000
Button/Knob No.
DN–MC6000
CONTROLS
FUNCTIONALITY
Push / Rotate
SHIFT +
q
EFX.1 knob
Controls the relative mix of the direct-to-processed signal.
ADVANED EFX MODE: Selects effect type.
CHAINED EFX MODE: –
EFX.2 knob
ADVANED EFX MODE: Controls the effect parameter.
CHAINED EFX MODE: Controls the amount of the selected
effect.
ADVANED EFX MODE: –
CHAINED EFX MODE: Selects effect type.
EFX.3 knob
EFX.4 knob
w
EFX.1
ADVANED EFX MODE: Switches the effect parameter.
CHAINED EFX MODE: –
–
EFX.2
ADVANED EFX MODE: Switches the effect parameter on and off.
CHAINED EFX MODE: Switches the selected effect on and off.
–
EFX.3
EFX.4
e
FX 1/2
Switches the FX1/2 on and off.
–
r
DECK CHG.
Choose a focus of DECK A-C/B-D.
–
t
KEYLOCK
Switches key lock feature on and off.
TAP feature.
y
LOOP IN
Sets Loop In point.
Clear the LOOP.
LOOP OUT
Sets Loop Out point.
u
+/–
Edits the Loop Size / In BeatJump mode, edit the jump size. In BeatJump mode, Moves by edited jump size.
AUTO LOOP
Switches Auto Loop feature on and off.
Opens the advanced panel for BeatJump feature.
i
CUE1–4
(SAMP.1–4)
SAMP.mode=OFF : Set Cue 1–4 point and play.
z
SAMP.mode=ON : Set Cue 5–8 point and play.
z
Deletes CUE point.
z
o
SHIFT
Deletes CUE or LOOP point / Shift function.
–
Q0
SAMP.
Selects CUE1–4 or CUE5–8.
–
Q1
JOG WHEEL
Scratch, Search, or Bend feature.
Fast search for fi les in fi le list.
Q2
FAST /–
Fast search feature.
+ : Forward.
– : Reverse.
+ : Bend mode (touch sense of DN–MC6000 off ) feature.
– : Vinyl mode (touch sense of DN–MC6000 on) feature.
Q3
CUE
Sets current cue point, or back to current cue point.
–
Q4
PLAY/PAUSE
Play or Pause.
–
Q5
PITCH BEND+/–
Controls the pitch bend.
+ : Pitch lock feature of DN–MC6000 on.
– : Pitch lock feature of DN–MC6000 off.
Q6
SYNC
Automatic beat matching.
Sets current Deck to the Master for SYNC feature.
Q7
PITCH FADER
Adjusts the pitch.
–
Q8
PARAM.1 knob
Controls the fi lter cutoff.
–
Q9
PARAM.2 knob
W0
PARAM.1
Switches Filter feature, on and off.
–
W1
PARAM.2
W2
LOAD A
Loads the selected song on the deck A.
Loads the selected song on the deck C.
z
Duplicate function in TRAKTOR LE.
LOAD B
Loads the selected song on the deck B.
Loads the selected song on the deck D.
z
Duplicate function in TRAKTOR LE.
W3
Track select knob
(with SW)
ROTATE:
Scrolls through selected library in browser list.
PUSH : –
ROTATE: Scrolls through browser tree.
PUSH: Opens and close directory/folder in browser tree.
W4
BACK
Jumps cursor to previous favorites slots.
Loads the selected song on the preview player.
FWD
Jumps cursor to next favorites slots.
The preview player Play or Pause.
W5
RECORD
–
MIDI channel of DN–MC6000 changes.
DECK CHG.= BLUE
DECK A = MIDI CHANNEL 13, DECK B = MIDI CHANNEL 15
DECK CHG.= RED
DECK C = MIDI CHANNEL 14, DECK D = MIDI CHANNEL 16
W6
EFX.
–
MIDI channel of DN–MC6000 changes.
DECK CHG.= BLUE
DECK A = MIDI CHANNEL 9, DECK B = MIDI CHANNEL 11
DECK CHG.= RED
DECK C = MIDI CHANNEL 10, DECK D = MIDI CHANNEL 12
W7
SAMPLE
–
MIDI channel of DN–MC6000 changes.
DECK CHG.= BLUE
DECK A = MIDI CHANNEL 5, DECK B = MIDI CHANNEL 7
DECK CHG.= RED
DECK C = MIDI CHANNEL 6, DECK D = MIDI CHANNEL 8
W8
BROWSER
Expands or Shrinks the browser window.
MIDI channel of DN–MC6000 changes.
DECK CHG.= BLUE
DECK A = MIDI CHANNEL 1, DECK B = MIDI CHANNEL 3
DECK CHG.= RED
DECK C = MIDI CHANNEL 2, DECK D = MIDI CHANNEL 4
E7
CHANNEL FADER
Controls the level of the selected channel.
–
R0
CROSS FADER
Controls the relative output level from the summed A and B Mixes.
–
R6
CHANNEL LEVEL
Adjusts the level of the selected channel.
–
R7
CHANNEL EQ HI
Adjusts the Hi-frequency response.
–
CHANNEL EQ MID Adjusts the Mid-frequency response.
–
CHANNEL EQ LOW Adjusts the Low-frequency response.
–
R8
CUE CH1–4
Routes the respective source to the headphone and
metercue sections.
R9
CF CONTOUR knob Adjusts the shape of the cross fader curve.
–
z
Function available in TRAKTOR Pro.
• Before following these instructions please perform the “Setup Wizard” found in the TRAKTOR software.
(Refer to the “TRAKTOR Getting Started” guide supplied with TRAKTOR.)
• Regarding Audio Setting for Mac, please refer to the “DN-MC6000_mac_confi guration_manual.pdf” in DN-MC6000
Resource CD-ROM attached.
Available for TRAKTOR control with DN-MC6000
Q8
Q9
W0
W1
W2
W4
W5
W6
W8
W7
W3
Q2
Q3
Q4
Q5
Q6Q7
q
w
r
e
t
i
o
Q0
Q1
y
u
R1
R2
R3
R4
R8 R7 R6
R5
R6
R8
R7
R0
E7
E9
E8
E7
W9
E0
E2
E1
E3
E4
E5
E6
Controlling two decks on TRAKTOR
Set the following items of DN-MC6000 and TRAKTOR.
n
Mixing by using DN-MC6000 CH2/CH3
Setting of DN-MC6000
Channel input source switch knob (Top panel)
CH2: “USB1/2 + MIDI”
CH3: “USB3/4 + MIDI”
Mixing mode selector switch (Rear panel)
“INT MIX”
R9
Setting of TRAKTOR
G
Mac
H
G
PC
H
Audio Setup
Audio Device: DN-MC6000
Output Routing
Mixing Mode: External
Output Channel A : L = 1:Front Left
R = 2:Front Right
Output Channel B : L = 3:Back Left
R = 4:Back Right
Input Routing
Input Channel A : L (Mono)= :Front Left
R = 2:Front Right
Input Channel B : L (Mono) = 3:Front Center
R = 4:Low Frequency Effects
Audio Setup
Audio Device: DENON DJ ASIO Driver
Output Routing
Mixing Mode: External
Output Channel A : L = 1:DN-MC6000 1
R = 2:DN-MC6000 2
Output Channel B : L = 3:DN-MC6000 3
R = 4:DN-MC6000 4
Input Routing
Input Channel A : L (Mono)= 1:DN-MC6000 1
R = 2:DN-MC6000 2
Input Channel B : L (Mono) = 3:DN-MC6000 3
R = 4:DN-MC6000 4
n
Using the mixer function of TRAKTOR
Setting of DN-MC6000
Channel input source switch knob (Top panel)
CH2: “USB1/2 + MIDI”
CH3: “USB3/4 + MIDI”
Mixing mode selector switch (Rear panel)
“PC MIX”
Setting of TRAKTOR
G
Mac
H
G
PC
H
Audio Setup
Audio Device: DN-MC6000
Output Routing
Mixing Mode: Internal
Output Monitor : L = 3:Back Left
R = 4:Back Right
Output Master : L = 1:Front Left
R = 2:Front Right
Input Routing
Input Channel A : L (Mono)= 1:Front Left
R = 2:Front Right
Input Channel B : L (Mono) = 3:Front Center
R = 4:Low Frequency Effects
Audio Setup
Audio Device: DENON DJ ASIO Driver
Output Routing
Mixing Mode: Internal
Output Monitor : L = 3:DN-MC6000 3
R = 4:DN-MC6000 4
Output Master : L = 1:DN-MC6000 1
R = 2:DN-MC6000 2
Input Routing
Input Channel A : L (Mono)= 1:DN-MC6000 1
R = 2:DN-MC6000 2
Input Channel B : L (Mono) = 3:DN-MC6000 3
R = 4:DN-MC6000 4
Controlling four decks on TRAKTOR
Set the following items of DN-MC6000 and TRAKTOR.
n
Setting of DN-MC6000
Channel input source switch knob (Top panel)
CH1: “MIDI”
CH2: “USB1/2 + MIDI”
CH3: “USB3/4 + MIDI”
CH4: “MIDI”
Mixing mode selector switch (Rear panel)
“PC MIX”
•
“Setting of TRAKTOR”
is the same in the case of
“Using the mixer function of TRAKTOR” –
“Setting of
TRAKTOR”
mentioned above.
Mac OS and iTunes are registered trademarks of Apple Inc., registered in the U.S. and other countries.
Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States
and/or other countries. Intel Core and Pentium are registered trademarks of Intel Corporation in the
United States and other countries. All trademarks are the property of their respective holders. All
specifi cations subject to change without notice.
©2010, NATIVE INSTRUMENTS GmbH. All rights reserved. Made in Germany.
DN-MC6000_QuickGuide_330_101115.indd 1
2010/11/17 11:11:45
