Denon DN-HC5000 - Serato ITCH Hardware/Software Package, Full Manual, Page: 9 / 34

ENGLISH
5
ENGLISH
1. Front panel (ITCH)
q e t y e u i o Q1 Q3 Q4 Q6
w r Q0 Q2 Q5 Q7
Q9 W0 Q9 W1 W3 W5 W7 W9
Q8 Q8 W2 W4 W6 W8 E0
q IN1 / IN2 / IN3
Pressing IN1/IN2/IN3 button will set cue points
1/2/3, pressing them again will begin playback
from the relevant cue point.
Press SHIFT + IN1/IN2/IN3 to delete a cue
point.
w OUT1 / OUT2 / OUT3
When you have a cue point set this will create
a loop out point. Playback will loop between
the cue point and the out point.
Press SHIFT + OUT1 / OUT2 / OUT3 to delete
a loop out point.
e
8 9
TRACK (FILE) SEARCH
Skip to the next or previous track in the current
selection.
r CUE
Pressing this button in play mode will force
the file back to the position which playback
started.
t
6 7
FAST SEARCH
When one of these buttons is pressed and
held in, the disc is fast-searched in the reverse
(
6
) or forward (
7
) direction.
y PLAY/PAUSE
This button will start or pause playback.
u JOG disc
Use the JOG disc to move through and scrub
the track.
i JOG MODE
Select from Scratch Mode and Nudge Mode.
o Pitch Slider
Use this slider to adjust playing speed.
The playing speed decreases when sliding
upwards and increases downwards.
Q0 CRATES
Switches cursor focus to the crates area.
Q1 FILES
Switches cursor focus to the files area.
Q2 BROWSE
Switches cursor focus to the browse area.
Q3 SHIFT
Holding shift engages shift functions of many
of the buttons.
Q4 HISTORY
Switches cursor focus to the history area.
Q55 PREPARE
Switches cursor focus to the prepare area.
Q6 ADD
Adds selected track to the prepare area.
Q7 ITCH / CD
Toggle between ITCH or CD control.
Q8 FWD / BACK
Skip to the next or previous track in the current
selection.
Q9 LOAD TO A/B
The track that has been selected is loaded into
each deck A and B.
W0 PARAMETERS knob
• Turn the PARAMETERS knob to navigate up
and down through the library.
• Press to move through any browse fields
available.
W1 X2
Doubles the length of the current Auto Loop.
W2 PITCH BEND
Press + to temporarily increase playback speed,
press – to temporarily decrease playback speed.
W3 AUTO LOOP
Auto loop works for tracks that have BPM
calculated and when pressed will create an
auto loop of the current Auto loop value.
W4 KEY AD J. / PITCH RANGE
• KEY ADJ.:
Press to turn key lock on and off.
• PITCH RANGE:
Press SHIFT + KEY ADJ. to change the
PITCH SLIDER range. Select from +/– 8, 16
or 25.
W5 X
1
2
Halves the length of the current Auto Loop.
W6 CENSOR/REVERSE
• CENSOR:
Pressing censor reverses playback
temporarily, when released playback resumes
from where the play head would have been
if censor was not pressed. It is used to
“censor” out portions of a song.
• REVERSE:
Pressing SHIFT + CENSOR toggles reverse
playback mode.
W7 TAP
Tap in time with the beat to calculate the BPM
value for a track.
W8 AUTO TEMPO/SYNC
• AUTO TEMPO:
Turns Auto Tempo on and off. This
automatically matches the tempo of the track
to that of the track loaded to the opposite
deck.
• SYNC:
Press SHIFT + AUTO TEMPO to Beat Sync.
This automatically aligns the last transient in
the track with the closest one in the opposite
playing track.
W9 TIME/PITCH DISPLAY
• TIME:
When this button is pressed, the time indicator
switches between “ELAPSED” (elapsed time),
“REMAIN” (remaining time).
• PITCH DISPLAY:
Press SHIFT + TIME to switch between
displaying the pitch adjustment on the Pitch
Indicator on the DN-HC5000 as a percentage
or as the adjusted BPM value.
E0 TITLE/PLAYBACK MODE
• TITLE:
Scrolls the track's title in the display panel.
• PLAYBACK MODE:
Press SHIFT + TITLE to toggle between single
and continuous playback mode.
3 ITCH OPERATION