Denon DN-HC5000 - Serato ITCH Hardware/Software Package Full Manual Download Page 23

ENGLISH

19

ENGLISH

18. Corrupt Files

Corrupt file: This MP3 contains invalid frames.

This MP3 contains frames which do not conform 
strictly to the official MP3 specification. ITCH can 
not be certain that this file will play back 100% 
accurately.

Corrupt  file:  This  file  contains  corrupt  frames 
that may result in audible glitches.

This file contains two or more contiguous corrupt 
frames.  Since  corrupt  frames  are  replaced  with 
silence, this could result in what might sound like 
an audio glitch

Corrupt file: This file has been split. You should 
check the beginning for audio glitches.

The  first  MPEG  audio  frame  in  this  file  refers 
to  audio  that  should  be  present  before  it  but  is 
not.  This  is  usually  the  result  of  incorrect  MP3 
editing.  Since  a  corrupt  frame  is  replaced  with 
silence  and  most  songs  start  with  silence,  the 
resulting silence might not be noticeable. All the 
same,  listen  to  the  beginning  of  the  song,  just 
to be sure.

Corrupt  file:  This  MP3  contains  frames  with 
corrupt data.

Decoding  of  an  MPEG  audio  frame  failed.  This 
means  that  the  frame  contained  invalid  data. 
As usual with corrupt frames, this frame will be 
played as silence.

Corrupt  file:  This  MP3  lost  syncronization 
between the frame index and the frames.

ITCH is reading an old overview of an MP3 that 
has  been  edited  in  a  3rd  party  editing  program. 
Re-building  the  overviews  for  the  affected  files 
usually corrects this error.

Corrupt  file:  This  file  contains  invalid  audio 
data.

ITCH  encountered  a  lot  of  invalid  data  while 
looking for audio in this file. This message alerts 
you to the fact that the file you're trying to play 
contains  corrupt  data.  This  may,  or  may  not, 
affect playback.

Corrupt file: This MP3 contains no valid frames.

No audio could be found in this file, which means 
it  is  completely  unplayable  as  far  as  ITCH  is 
concerned.  Please  make  sure  this  really  is  an 
audio file.

Unsupported  file:  This  MP3  contains  multiple 
layers.

While  scanning  this  file,  ITCH    found  frames 
belonging  to  multiple  MPEG  layers.  ITCH  does 
not  support  MP3s  that  contain  frames  from 
multiple  layers  –  some  frames  may  be  output 
as silence.

Unsupported  file  :  This  file  is  more  than  2GB 
in size.

Self explanatory. At the moment, ITCH does not 
support files that are 2GB in size (or larger).

Unsupported  file  :  This  file  has  data  blocks 
greater than 2GB in size.

This  file  contains  chunks  of  data  that  are  larger 
than  2GB.  ITCH  does  not  support  files  that  are 
more than 2GB in size.

Corrupt file: This WAV contains no valid chunks.

This  WAV  file  contains  no  recognizable  WAV 
data.  It  is  quite  possible  that  this  might  not  be 
a WAV file.

Unsupported file: This file's data is not in PCM 
format.

WAV  files  can  contain  data  in  several  formats. 
ITCH only supports WAV files that contain data in 
the PCM format.

Unsupported file: This file has a sampling rate 
greater than 48kHz.

ITCH  does  not  support  sampling  rates  greater 
than  48  kHz.  If  you  see  this  message,  the 
simplest approach is to re-sample the audio at 48 
kHz and re-save the file.

Unsupported  file:  This  file  uses  more  than  24 
bits per sample

ITCH supports a maximum of 24 bits per sample 
of audio data. 

Corrupt file: This WAV is incomplete.

ITCH  expected  more  data  in  the  file,  but  found 
none.  This  could  be  because  the  file  was 
incorrectly  truncated  or  because  the  data  in 
the  file  is  corrupt,  causing  ITCH  to  incorrectly 
estimate the amount of data present in the file.

Corrupt file: This file contains corrupt blocks.

This file contains blocks of data that report their 
size  to  be  zero.  This  message  was  inserted 
to  identify  files  that  might  cause  lockups  on 
previous versions of ITCH.

Corrupt file: This song contains no audio data.

ITCH could not find any audio in this file. Please 
check to make sure this file contains audio in a 
format that ITCH supports.

Corrupt file: This song contains invalid samples.

This  file  contains  samples  of  audio  that  are  too 
small  to  represent  accurately  and  will  therefore 
be  truncated  to  zero.  This  should  not  result  in 
any audible audio artifacts, but could cause audio 
dropouts on earlier versions of ITCH.

Summary of Contents for DN-HC5000 - Serato ITCH Hardware/Software Package



































Reviews: