Denon DN-D4500MK2, Owner'S Manual

Page: 29 / 36

23
Getting started
Connection
Troubleshooting
Specifications
Index
Preset
Others
Playback
Others
Memo function
Details set in advance can be stored as memo data on a USB memory device or HDD or Flash Memory.
When you need to configure settings in a short space of time, settings can be configured automatically
SEL. SEL.
TITLE
MEMO
TITLE
MEMO
BACK
PRESET
BACK
PRESET
Details that can be saved as memo data
• Cue point
• Manual loop point (A1/B1, A2, B2 point)
•
Hot start or Stutter
• Playback speed
• Pitch ON or OFF
• Key adjust ON or OFF
• Pitch range
Memo settings
n Memo Set
Save the setting details to memo data.
1
Set this unit with memo data.
2
Press TITLE - MEMO.
“Memo Set?” is shown in the display.
3
Press
SEL.
“Complete!” is shown in the display.
• When “MEMO” is shown in the display, memo data has already been saved. Clear the saved memo
data, and redo the setting.
• If memo data cannot be saved, check the remaining capacity of the USB memory device or HDD. It may
not be possible to save memo data if there is not enough spare memory.
• If the USB memory device or HDD is equipped with a security function, check that the security is disabled.
• 1000 is the maximum possible number of tracks that can be stored to memory.
However, to simplify the MEMO operations, the memory system manages each 200 MEMO data groups
as a minimum unit (the total 1000 memory capacity divided into 5 memory data groups). When you want
to clear just one MEMO data in the 1 MEMO CLEAR mode (
v
page 24), the unit will erase the memo
information but not the internal memo allocation number. Accordingly, depending on conditions, the
number of tracks that can be stored in the memory may be fewer than 1000.
Once you reached 1000 stored points, you will see a message that says “MEMO FULL!”. At this time
you will need to “delete” old data to make room for new memo points. Therefore the oldest 200 memo
points in that group will be deleted and become available.
• The MEMO indicator on the display lights up when a track for which data is stored in the memory is
selected.