Denon DN-D4500MK2, Owner'S Manual

Page: 21 / 36

15
Getting started
Troubleshooting
Specifications
Index
Others
Preset
Playback
Connection
Preparation for playback
USB memory device or HDD playback
• Connect USB memory device or HDD to the USB port on the top panel, and prepare to playback a track.
• For details on the file formats that can be played on this unit, see v page 5.
1
Connect a USB memory device or HDD to the USB1 port or USB2 port.
2
Press
SOURCE
to switch the source to USB1/USB2.
3
Turn
SEL.
to select the folder.
The LED indicator lights in green when USB1 port is selected.
The LED indicator lights in red when USB2 port is selected.
4
Press
SEL.
The folder names or track names within the selected folder are shown in the display.
• Press
BACK
to go back 1 folder level.
5
Turn
SEL.
to select the track you want to play.
6
Press SEL.
The cue standby mode is set at the start of the selected tracks.
• FAT16/FAT32 is supported for the USB memory device and HDD.
• When using a USB HDD of the kind to which an AC adapter can be connected to supply power, use the
AC adapter.
• If the USB memory device is not recognized, disconnect the USB memory device and then reconnect it.
NOTE
• Depending on the type of mass-storage USB memory device or portable music player, it may take some
time for this unit to recognize the device.
• Do not connect devices or cables that do not conform to USB standards.
• USB memory devices will not work via a USB hub.
• NTFS format USB memory devices and HDDs are not supported. If used, this unit may malfunction.
• When using a HDD that has an automatic power ON/OFF function that switches the HDD power on and
off in sync with the computer, disable this function in the settings.
• The maximum capacity of USB memory devices and HDDs you can use is 2 TB.
• This unit cannot format USB memory devices or HDDs.
SOURCE
SEL.
SOURCE
SEL.
BACK BACK
(CD/USB1/USB2) (CD/USB1/USB2)