14
Getting started
Troubleshooting
Specifications
Index
Others
Preset
Playback
Connection
Preparation for playback
CD-ROM/CD-R/CD-RW playback
For details on the files that can be played on this unit, see
NOTE
This section explains the operating procedures for CD-ROM/CD-R/
CD-RW discs that have been finalized as data CDs. For CDs that have
been finalized as music CDs, see “CD playback” (
1
Press
SOURCE
to switch the source to CD.
2
Press
OPEN/CLOSE
on the unit to open the disc
holder and insert the disc.
3
Hold down
SEL.
(-MP3 DISC SEARCH MODE).
4
Turn
SEL.
to select “FileFolder”.
5
Turn
SEL.
to select the folder that contains the track
you want to play.
6
Press
SEL.
The folder names or track names within the folder are shown
in the display.
7
Turn
SEL.
to select the track you want to play.
•
Press
BACK
to return to the previous folder.
8
Press
SEL.
The cue standby mode is set at the start of the selected tracks.
9
Press
13
.
13
lights green, and playback starts.
n
Ejecting CDs
Press
OPEN/CLOSE
on the unit to open the disc holder.
The CD is ejected from the disc loading slot.
NOTE
Be sure the CD is paused before ejecting. If
OPEN/CLOSE
is pressed
during CD playback, the CD will not be ejected.
n
If the CD cannot be ejected
If the CD is not ejected due to a malfunction in the unit even when
OPEN/CLOSE
is pressed, it can be ejected using other buttons.
Hold down
OPEN/CLOSE
for the disc holder 1 or 2, and
press
POWER ON/OFF
.
The CD is ejected from the disc loading slot.
n
Selecting the file
There are three methods for selecting files.
File search mode
To search a file directly from among all of those recorded in a disc.
Folder search mode
To specify the layer to select a folder or file from among all of those
recorded in a disc.
File name search mode
To sort the files in alphabetical order to select from among all of
those recorded in a disc.
n
Selecting files in file search mode
1
Hold down
SEL.
(-MP3 DISC SEARCH MODE).
2
Turn
SEL.
to select “FileSearch”.
3
Press
SEL.
•
To select files in group of ten, hold down
SEL.
and turn.
4
Turn
SEL.
to select a file.
The cue standby mode is set at the start of the selected file.
See the illustration on the previous page for details of the buttons used for the
operations on this page.
n
Selecting files in folder search mode
1
Hold down
SEL.
(-MP3 DISC SEARCH MODE).
2
Turn
SEL.
to select “FileFolder”.
3
Press
SEL.
•
To return to the layer of the upper folder, press
BACK
.
4
Turn
SEL.
to select a file.
5
Press
SEL
.
The cue standby mode is set at the start of the selected file.
n
Selecting files in file name search mode
1
Hold down
SEL.
(-MP3 DISC SEARCH MODE).
2
Turn
SEL.
to select “File Name”.
3
Press
SEL.
4
Turn
SEL.
to select a file.
To change to the next initial letter, hold down
SEL.
and turn.
5
Press
SEL.
The cue standby mode is set at the start of the selected file.
