4
Setup
Items not listed under
Introduction >
Box Contents
are sold separately.
Warnings:
Do
not
make any connections when any device is powered on.
Do
not
allow the wires from terminals to come in contact with each other.
Do
not
connect either positive output to chassis ground.
1.
Use standard speaker wire (up to 16 AWG) to connect your loudspeakers to the included
4-pin Euroblock connector. Insert that Euroblock connector into DN-200AZB’s
output
.
2.
Optional:
Use standard speaker wire (up to 16 AWG) to connect an external receiver or
amplifier to the included 3-pin Euroblock connector. Insert that Euroblock connector into
DN-200AZB’s
input
.
3.
Use the included
power adapter
to connect DN-200AZB’s
power input
to your power
source.
Important:
Do not use DN-200AZB near a microwave oven, which can interfere with the
Bluetooth signal reception.
4.
Make sure all of your connections are secure, and power on your receiver first (if you are
using one) and any devices connected to it.
5.
Press DN-200AZB’s
power button
to power it on.
Connection Diagram
ZONE 2
SOURCE
ZONE 3
ZONE 3
SOURCE
STATUS
DIMMER
VIDEO
AUX 1
SETUP MIC
INTEGRATED NETWORK AV RECEIVER
S
S
E
E
R
I
AVR-X4000
IN-
Command
L - AUDIO - R
1 CBL/SAT
3 GAME 4 NETWORK
QUICK SELECT
2 Blu-ray
PHONES
BACK
ENTER
INFO
SETUP
ZONE 2
SOURCE SELECT
MASTER VOLUME
ON/OFF
AUX 1
HDMI 7
5V/1A
ON/OFF
OPTION
Receiver Loudspeaker
Power
Bluetooth device
(smartphone, tablet,
computer, etc.)
Bluetooth Antenna
