1. Version Display Mode
1.1. Actions
Version information is displayed when the device is started in this mode.
1.2. Starting up
(1) Turn the power on.
(2) Press the "
SOURCE
" button to set the input source to CD.
(3) "
NO DISK
" appears in the display.
(4) With the power on, press the "
CLEAR
" → "
Cursor LEFT
" → "
STOP
" buttons on the remote control.
【Ver display】
Display
X
X
X
X
X
X
X
X
Software
MCU version
DSP version
fixed
Region
(E2, E3, JP, CN)
Example : MCU version = 11, DSP version = 22, Region = E2
(5) The software version is displayed for 7 seconds before returning to the normal use status display.
(
2. Display check mode
2.1. Operations
(1) While the power is On, hold down buttons "
SOURCE
" and "
9
" for at least 5 seconds.
(2) The display is fully lit.
The power LED (orange) and Bluetooth LED (blue) are lit.
(3) The display returns to the normal mode after 3 seconds.
(
3. Initialization Mode
Make sure to initialize this unit after replacing the microcomputer or any peripheral equipment, or the
PCB.
3.1. Operations
(1) While the power is On, hold down buttons "
SOURCE
" and "
SOUND MODE
" for at least 5 seconds.
(2) "
RESET
" is displayed for 3 seconds.
(3) The display returns to the normal mode after the reset.
3.2. Initialization item
No.
Items
Default
1 Input source
CD
2 Auto Standby
E2 : On / Others : Off
3 DIMMER
100%
4 TUNER PRESET MEMORY
All clear
5 VOLUME
05
6 TONE CONTROL
Flat
7 BALANCE CONTROL
Center
8 S.DIRECT
Off
9 Bluetooth link information
All clear
10 CLOCK / TIMER
All clear
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
46
