Denon D-T1 Owner'S Manual Download

Page: 58 / 72

Bluetooth cannot be played back

Symptom

Cause / Solution

Page

Bluetooth devices cannot

be connected to this unit.

The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the

Bluetooth device to enable the Bluetooth function.

－

Bring the Bluetooth device near to this unit.

－

The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.

－

Turn the power of the Bluetooth device off and on again, and then try again.

－

The Bluetooth function is off. Press Bluetooth button, activate the Bluetooth function and connect again.

The sound is cut off.

Bring the Bluetooth device near to this unit.

－

Remove obstructions between the Bluetooth device and this unit.

－

To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN

devices and other Bluetooth devices.

－

Reconnect the Bluetooth device.

－

Summary of Contents for D-T1








































































Search results

Summary of Contents for D-T1

Reviews:

Related manuals for D-T1

Brands by name

Popular brands

Denon D-T1, Owner'S Manual

Search results

Summary of Contents for D-T1

Reviews:

Related manuals for D-T1

Brands by name

Popular brands