Denon D-T1, Owner'S Manual

Page: 54 / 72

o
No sound comes out
Symptom Cause / Solution Page
No sound comes out of
speakers.
0
Check the connections for all devices. 16
0
Insert connection cables all the way in.
－
0
Check that input connectors and output connectors are not reversely connected.
－
0
Check cables for damage.
－
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals.
17
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. 17
0
Check that a proper input source is selected. 25
0
Adjust the volume. 25
0
Cancel the mute mode. 25
0
Check the digital audio output setting on the connected device. The initial settings may be off depending
on the device.
－
0
Do not input non-PCM signals, such as Dolby Digital and DTS. This causes noise and could damage the
speakers.
38
0
No sound is output from the speakers when headphones are connected. 10
0
To playback via a Bluetooth connection, perform pairing between this unit and the Bluetooth device. 34
Contents Connections Playback Settings Tips Appendix
54
Front panel Rear panel
Remote control
unit
Index