Setting the timer playback
Audio from the set input source can be played back at a specified time.
Audio can also be played at the same time every day.
1
Press TIMER MENU.
The timer setting menu is displayed.
2
Use
ui
to select “ALARM”, then press ENTER.
The timer playback setting menu is displayed.
3
Use
ui
to change to desired setting, then press
ENTER to enter the setting.
A
ON TIME
Use
ui
to select “hours” for the alarm start time, then press
ENTER.
Use
ui
to select “minutes” for the alarm start time, then press
ENTER.
B
OFF TIME
Use
ui
to select “hours” for the alarm stop time, then press
ENTER.
Use
ui
to select “minutes” for the alarm stop time, then press
ENTER.
C
SOURCE SELECT
Use
ui
to select the source, then press ENTER.
CD / FM / AM
D
MODE SELECT
Use
ui
to select the alarm mode, then press ENTER.
ONCE:
Playback starts and stops (the power
turns off) once only at the set times.
EVERY:
Playback starts and stops (the power
turns off) at the set times each day.
4
Press POWER
X
to set the power to standby.
Alarm standby mode is set, and the power indicator lights orange.
46
