TECHNICAL SPECIFICATIONS
n
Audio section
• Power amplifier
Rated output
:
Front
：
150W+150W (8Ω, 20Hz
-
20kHz with 0.05% T.H.D.)
190W+190W (6Ω, 1kHz with 0.7% T.H.D)
Center
：
150W (8Ω, 20Hz - 20kHz with 0.05% T.H.D.)
190W (6Ω, 1 kHz with 0.7 % T.H.D.)
Surround
：
150W+150W (8Ω, 20 Hz - 20 kHz with 0.05% T.H.D.)
190W+190W (6Ω, 1 kHz with 0.7 % T.H.D.)
Surround back
：
150W+150W (8Ω, 20 Hz - 20 kHz with 0.05% T.H.D.)
190W+190W (6Ω, 1 kHz with 0.7 % T.H.D.)
Height1 / Front wide / Height2
：
150W+150W (8Ω, 20 Hz - 20 kHz with 0.05% T.H.D.)
190W+190W (6Ω, 1 kHz with 0.7 % T.H.D.)
Rated output
：
170 W x 2-channel (8 Ω)
280 W x 2-channel (4 Ω)
Output connectors
：
4 - 16Ω
n
Analog section
Input sensitivity/Input impedance
：
200 mV/47 kΩ
Frequency response
：
10 Hz - 100 kHz — +1, -3 dB(Direct mode)
S/N
：
102 dB(IHF-A weighted, Direct mode)
Distortion
：
0.005 % (20 Hz – 20 kHz) (Direct mode)
Rated output
：
1.2 V
n
Digital section
D/A output
：
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input
：
Format — Digital audio interface
n
Phono equalizer section
Input sensitivity
：
2.5 mV
RIAA deviation
：
±1 dB (20 Hz to 20 kHz)
S/N
：
74 dB (IHF-A)
Distortion factor
：
0.03 % (1 kHz, 3 V)
n
Video section
• Standard video connectors
Input/output level and impedance
：
1 Vp-p, 75 Ω
Frequency response
：
5 Hz – 10 MHz — 0, –3 dB
• Color component video connector
Input/output level and impedance
：
Y signal — 1 Vp-p, 75 Ω
PB / CB signal — 0.7 Vp-p, 75 Ω
PR / CR signal — 0.7 Vp-p, 75 Ω
Frequency response
：
5 Hz - 60 MHz — 0, -3 dB
n
Tuner section
Reception frequency range
：
FM
87.5 MHz - 107.9 MHz (for E3)
FM
87.5 MHz - 108.0 MHz (for E2, E1C)
FM
76.0 MHz - 90.0 MHz (for JP)
AM
530 kHz - 1710 kHz (for E3)
AM
522 kHz - 1611 kHz (for E2, E1C)
AM
522 kHz - 1629 kHz (for JP)
Effective sensitivity
：
FM
1.5μV
(
14.8dBf) (for E3)
FM
1.2μV
(
12.8dBf) (for E2, E1C, JP)
AM
20 μV (for E3)
AM
18 μV (for E2, E1C, JP)
50 dB sensitivity
：
MONO ― 2.8 μV (20.2 dBf) (for E2, E1C, JP)
S/N ratio (IHF-A)
：
MONO ― 70 dB (for E3)
MONO ― 78 dB (for E2, E1C, JP)
STEREO ― 68 dB (for E3)
STEREO ― 67 dB (for E2, E1C, JP)
HD ―
FM
85dB
AM
85dB (for E3)
Distortion (1 kHz)
：
MONO ― 0.1 % (for E3)
MONO ― 0.7 %
(
1 kHz) (for E2, E1C, JP)
SRETEO ― 0.2 % (for E3)
SRETEO ― 1.0 %
(
1 kHz) (for E2, E1C, JP)
HD ―
FM
0.02%
AM
0.02% (for E3)
n
Wireless LAN section
Network type (wireless LAN standard)
：
Conforming to Wi-Fi®
z
1
Security
：
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency
：
2.4 GHz
No. of channels
：
1 - 11 ch (for E3)
1 - 13 ch (for E2, E1C, JP)
z
1
The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product
Logo are registered trademarks of the Wi-Fi Alliance.
n
Bluetooth section
Communications system
：
Bluetooth Version 2.1 + EDR
(Enhanced Data Rate)
Transmission power
：
Maximum 2.5 mW (Class 2)
Maximum communication range
：
Approx. 32.8 ft/10 m in line of sight
Frequency band
：
2.4 GHz band
Modulation scheme
：
FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles
：
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.4
Corresponding codec
：
SBC, AAC
Transmission range (A2DP)
：
20 Hz - 20,000 Hz
n
General
Power supply
：
(for E3) :
AC 120 V, 60 Hz
(for E2) :
AC 230 V, 50 Hz / 60Hz
(for E1C) :
AC 220 V, 50 Hz
(for JP) :
AC 100 V, 50 Hz / 60Hz
Power consumption
：
780W
Power consumption in standby mode
：
0.1W
Power consumption in CEC standby mode
：
0.5W
Power consumption in network standby mode
：
4.5W
(Adapted to NEW DIGITAL PCB products)
：2.7W
For purposes of improvement, specifications and design are subject to
change without notice.
DIMENSION
Unit： in. (mm)
Weight： 31 lb 1 oz (14.1 kg)
434
16
180
196
259
344
60
45
45
245
65
73
25
383
427
22
22
h
9
