Denon AVR-X540BT Owner'S Manual Download Page 12

Page: 12 / 138

MASTER VOLUME

PHONES

SETUP MIC

TUNER

PRESET CH

TUNE

DIMMER

STATUS

QUICK SELECT

Bluetooth

GAME

CBL/SAT

DVD/Blu-ray

SOURCE SELECT

QUICK SELECT buttons

With a single press of any of these buttons, you can call up various

settings you’ve registered to each button such as the input source,

volume level and sound mode settings. (

p. 68)

Headphones jack (PHONES)

This is used to connect headphones.

When the headphones are plugged into this jack, audio will no longer

be output from the connected speakers or from the SUBWOOFER

connectors.

NOTE

To prevent hearing loss, do not raise the volume level excessively when using

headphones.

USB port (

)

This is used to connect USB storages (such as USB memory devices)

and the USB cable supplied. (

p. 33)

SETUP MIC jack

This is used to connect the supplied Sound calibration microphone.

Summary of Contents for AVR-X540BT










































































































































Search results

Summary of Contents for AVR-X540BT

Reviews:

Brands by name

Popular brands

Denon AVR-X540BT, Owner'S Manual

Search results

Summary of Contents for AVR-X540BT

Reviews:

Brands by name

Popular brands