Denon AVR-X500, Owner'S Manual

Page: 38 / 66

35
Preset Skip
Default settings are underlined.
Set the preset memory block (from A to G) you do not want to display.
Setting items Setting details
Block A – Block G
Select a block to be skipped
from among preset blocks
(from A to G).
TUNER
On
: Display the selected preset memory block.
SKIP
: Do not display the selected preset memory block.
Source Level
Default settings are underlined.
This function corrects the playback level of the selected input source’s audio input.
Make this setting if there are differences in the input volume levels between the different sources.
Setting items Setting details
Source Level –12dB – +12dB (0dB)
Input Select
Default settings are underlined.
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items Setting details
Input Mode
Set the audio input modes
for the different input
sources.
It is normally recommended
to set the audio input mode
to “Auto”.
Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input (OPTICAL 1 / OPTICAL 2).
Analog : Play only signals from analog input.
• At time of purchase, the settings of the different input sources are as
shown below.
Input source
CBL/SAT
DVD Blu-ray GAME
Default setting
Auto Analog HDMI HDMI
Input source
AUX TV AUDIO PORTABLE
Default setting
HDMI Digital Analog
Inputs
Setting items Setting details
Input Mode
(Continued)
• “Digital” can be set for the input source assigned to “OPTICAL 1” or
“OPTICAL 2” under “Input Assign” in the menu.
• If the input source is set to “Blu-ray”, “GAME”, “AUX” or “TV AUDIO”,
it cannot be set to “Analog”.
• If an input source is “TUNER” or “PORTABLE” the setting is fixed to
“Analog”.
• When digital signals are properly input, the indicator lights on
the display. If the indicator does not light, check the digital input
connector assignment and the connections.
Decode Mode
Set the audio decode mode
for input source.
CBL/SAT DVD
Blu-ray GAME
AUX TV AUDIO
PORTABLE
Auto
: Detect type of digital input signal and decode and play automatically.
PCM
: Decode and play only PCM input signals.
DTS
: Decode and play only DTS input signals.
• This item can be set for input sources for which “OPTICAL 1” or
“OPTICAL 2” is assigned at “Input Assign” (
v
page 34 ).
• This item can be set for HDMI input sources (CBL/SAT, Blu-ray, GAME
or AUX).
• Normally set this mode to “Auto”. Set “PCM” and “DTS” when
inputting the corresponding input signal.
Video Source
Default settings are underlined.
Video of another input source is played back combined with the playing audio.
Setting items Setting details
Video Select Default : Play the picture and sound of the input source.
CBL/SAT / DVD : Select video input source to view. The video of the
selected input source is played along with the audio currently being
played. This can be set for individual input sources.
NOTE
It is not possible to select HDMI input signals.
Basic instr
uctions
A
dv
anced instr
uctions
Inf
or
mation
A
dv
anced instr
uctions
DVD