11
Connecting a set-top box (Satellite tuner/Cable TV)
This section describes how to connect when your satellite tuner or cable TV does not support HDMI
connections.
For instructions on HDMI connections, see “Connecting HDMI devices” (
n
Audio connection
The following methods are available for connecting to this unit.
Use either of the methods to make
a connection.
The numbers prefixed with connectors indicate the recommendation order. The smaller the number is,
the higher playback quality is achieved.
a
DIGITAL AUDIO OPTICAL 1 connector
z
DIGITAL AUDIO OPTICAL 2 connector
When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play back
surround sound.
z
When making this type of connection, you must change the settings on this unit.
(
v
Input connector setting
)
s
AUDIO IN (CBL/SAT) connector
This makes an analog audio connection. This type of connection converts digital audio to analog
audio, so the output audio may be degraded compared to connections
a
.
n
Video connection
The following methods are available for connecting to this unit.
a
VIDEO IN (CBL/SAT) connector
This makes an analog video connection.
When making the following connection, you must change the input connector settings.
a
DIGITAL AUDIO OPTICAL 1 connector
Change the default “TV AUDIO” to “CBL/SAT”.
For how to change, see “Input Assign” (
Input connector setting
Connecting other devices
a
a
s
a
R
L
R
L
AUDIO
AUDIO
R
L
OUT
OUT
OPTICAL
OPTICAL
OUT
VIDEO
OUT
VIDEO
Satellite tuner/Cable TV
or
or
Basic instr
uctions
A
dv
anced instr
uctions
Inf
or
mation
Basic instr
uctions
DVD
