Denon AVR-X4100, Service Manual

Page: 76 / 236

5. Protection Pass Mode
5.1. Actions
• This mode allows the power to be turned on without activating protections.
• This is the same as normal power-on, except that protections are not activated.
5.2. Operations
Hold down buttons " CURSOR
0
", " STATUS " and " ZONE3 SOURCE " at the same time and press the power button to
turn on the power.
The device returns to the normal display after the following is displayed.
FLD L1
P r o t e c t i o n P a s s
This is displayed for 5 seconds before returning to the normal display.
6. CX870 / CY920 Reboot mode
6.1. Actions
• The CX870 / CY920 is restarted after CX870 / CY920 hangup.
• The CX870 / CY920 can be restarted even in the network standby setting.
(" Setup menu " – " Network " – " IP Control " – " Always On ")
6.2. Operations
(1) Select "
Online Music
" as the input source.
(2) Hold down buttons "
DIMMER
" and "
SETUP
" for at least 3 seconds while the power is on.
FL display during CX870 / CY920 reboot
FLD L1
N e t w o r k R e s t a r t
3. Returns to the normal display.
NOTE:
• The CX870 / CY920 Reboot operation is not accepted again for one minute after executing the reboot.
• Reception is prohibited during update, save and load.
76