Denon AVR-X3800H, Owner'S Manual

Page: 50 / 321

Connecting 11.1-channel speakers
o
Example layout when using surround back
and two sets of height speakers
C
FL FR
SBL
SBR
SW
SL SR
FHL FHR
RHL RHR
For each speaker connection, refer to the following.
0
“Connecting speakers to the speaker terminals” (
v
p. 42)
0
“Connecting an external power amplifier” (
v
p. 43)
0
Set “Floor” to “5ch & SB” and “Height Sp” (or “Dolby Sp”) to “4ch” in the menu
when connecting in this configuration. ( v p. 206)
FHR FHL RHR RHL C SR SL SBR SBL SW
FR FL
Power amplifier
z
1
z
1
z
1
z
1
z
2
z
2
z 1 You can change the Front Height Speakers and Rear Height Speakers to any
Height/Ceiling/Dolby Atmos Enabled speakers in the “Amp Assign” - “Layout”
setting. (
v
p. 209)
z 2 You can connect the external power amplifier to the Height 2 or Surround back
channel instead of the Front channel. Use the “Pre-out” setting in the menu to
set the channel connected to the external power amplifier. (
v
p. 213)
Contents Connections Playback Settings Tips Appendix
50
Front panel Display Rear panel Remote Index