Denon AVR-X2700H Owner'S Manual Download Page 218

Page: 218 / 283

Power On Volume

Define the volume setting that is active when the power is turned on.

Last

(Default):

Use the memorized setting from the last

session.

Mute:

Always mute when power is turned on.

1 – 98

(–79 dB – 18 dB):

The volume is adjusted to the set level.

This can be set when “Volume Level” is set to “Variable”. (

p. 217)

The dB value is displayed when the “Scale” setting is “-79.5 dB - 18.0 dB”.

(

p. 159)

Mute Level

Set the amount of attenuation when muting is on.

Full

(Default):

The sound is muted entirely.

-40 dB :

The sound is attenuated by 40 dB down.

-20 dB :

The sound is attenuated by 20 dB down.

Zone Rename

Change the display title of each zone to one you prefer.

MAIN ZONE

ZONE2

Set Defaults:

The default setting is restored for the edited

zone name.

Up to 10 characters can be input.

Quick Select Names

Change the quick select name that appears on the TV screen to one you

prefer.

Quick Select 1

Quick Select 2

Quick Select 3

Quick Select 4

Set Defaults:

The default setting is restored for the edited

quick select name.

Up to 16 characters can be input.

218

Summary of Contents for AVR-X2700H



























































































































































































































































































Search results

Summary of Contents for AVR-X2700H

Reviews:

Related manuals for AVR-X2700H

Brands by name

Popular brands

Denon AVR-X2700H, Owner'S Manual

Search results

Summary of Contents for AVR-X2700H

Reviews:

Related manuals for AVR-X2700H

Brands by name

Popular brands