3-2. Tuner Step Change mode (E2 only)
3-3. OSD Update Mode
3-2.1. Actions
Switches the tuning frequency of the tuner.
3-2.2. Starting up
While the power is On, hold down buttons "
TUNER PRESET CH +
", "
TUNE -
" and "
TUNE +
" for at least
3 seconds.
Displays "
AM9/FM50:
" using the "
STATUS
" button.
3-2.3. Displays
Pressing the button each time switches the display shown as follows.
AM9/FM50
"
TUNER PRESET CH +
" or "
DIMMER
"
AM10/FM200
Enter using the "
TUNE -
" button.
The display then returns to normal mode.
b
The step frequency of the tuner is not initialized during initialization.
This is not used during servicing. Do not use.
3-3.1. Operations
Exit the OSD Update mode
Remove the power plug to exit this mode.
OSD Update:Off
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
72
