Denon AVR-X2300W Owner'S Manual Download Page 167

Page: 167 / 287

Noise Reduction

Reduce overall video noise.

Low

Medium

High

Off

(Default : Off)

Enhancer

Emphasize picture sharpness.

0 – +12

(Default : 0)

HDMI Setup

Make settings for HDMI audio output, HDMI Pass Through and HDMI

Control settings.

NOTE

When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more

standby power. (“HDMI Pass Through” (

p. 168), “HDMI

Control” (

p. 169)) If you are not using this unit for an extended period, it is

recommended that you unplug the power cord from the power outlet.

HDMI Audio Out

Select HDMI audio output device.

AVR

(Default)

Play back through speakers connected to

the unit.

TV:

Play back through TV connected to the

unit.

When the HDMI control function is activated, priority is given to the TV audio

setting. (

p. 133)

When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is

output as 2-channel from the HDMI OUT connector.

167

Summary of Contents for AVR-X2300W































































































































































































































































































Search results

Summary of Contents for AVR-X2300W

Reviews:

Denon AVR-X2300W, Owner'S Manual, Page: 167 / 287

Search results

Summary of Contents for AVR-X2300W

Reviews: