Denon AVR-S970H Owner'S Manual Download Page 204

Page: 204 / 283

Spotify Connect

Toggles access to Spotify Connect.

(Default):

Enables Spotify Connect.

Off:

Disables Spotify Connect.

Wi-Fi and Bluetooth

Enables/disables the Wi-Fi and Bluetooth radios.

Wi-Fi

The Wi-Fi function can be stopped to prevent noise that affects the

sound quality. Using a wired LAN to connect this unit to the network

enables playback with a high sound quality.

Enabled

(Default):

Enables the Wi-Fi function.

Disabled:

Disables the Wi-Fi function.

Bluetooth

Stopping Bluetooth receiver and transmitter functions reduces a

source of noise that affects sound quality, enabling higher sound

quality playback.

Enabled

(Default):

Enables the Bluetooth function.

Disabled:

Disables the Bluetooth function.

204

Summary of Contents for AVR-S970H



























































































































































































































































































Search results

Summary of Contents for AVR-S970H

Reviews:

Denon AVR-S970H, Owner'S Manual, Page: 204 / 283

Search results

Summary of Contents for AVR-S970H

Reviews: