Denon AVR-S730H Owner'S Manual Download Page 181

Page: 181 / 264

Manual

Enter the name (SSID) and password of the network you wish to

connect to.

Set the following items.

SSID:

Input the name of the wireless network

(SSID).

Security:

Select the encryption method according

to the encryption setting of the access

point you are using.

Password:

Input the password.

Select “Connect” at the end of the setting.

The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or

tablet that supports wireless LAN connection.

Press and hold the TUNE + and TUNE

－

buttons on the main unit for at least 3

seconds when the power of the unit is on.

Connect the wireless LAN of the PC or tablet used to “Denon AVR-S730H”

when the message “Connect your Wi-Fi device to Wi-Fi network called

“Denon

AVR-S730H”” appears in the display.

Start up the browser and enter “192.168.1.16/Settings/” in the URL.

Use the browser to enter the settings, select “Connect” and then exit the

settings.

The Default key of this unit is fixed at “1”. Set Default key of the router to “1” to use.

Settings

Configure the IP address.

If you are using a broadband router (DHCP function), the information

required for network connection such as the IP address will be

automatically configured since the DHCP function is set to “On” in the

default settings of this unit.

Set up the IP Address, Subnet Mask, Default Gateway and DNS server

information only when assigning a fixed IP address or when connecting

to a network without DHCP function.

DHCP

Settings

-IP Address
-Subnet Mask
-Default Gateway
-DNS

Off
000. 000. 000. 000
000. 000. 000. 000
000. 000. 000. 000
000. 000. 000. 000

Save
Cancel

181

Summary of Contents for AVR-S730H








































































































































































































































































Search results

Summary of Contents for AVR-S730H

Reviews:

Related manuals for AVR-S730H

Brands by name

Popular brands

Denon AVR-S730H, Owner'S Manual

Search results

Summary of Contents for AVR-S730H

Reviews:

Related manuals for AVR-S730H

Brands by name

Popular brands