Denon AVR-A110 Owner'S Manual Download Page 138

Page: 138 / 357

AirPlay function

Music files stored on your iPhone, iPod touch, iPad or iTunes can be

played on this unit via the network.

Source input will be switched to “HEOS Music” when AirPlay playback is started.

You can stop AirPlay playback by choosing other input source.

To see song and artist names together, press STATUS on the main unit.

For information about how to use iTunes, also see the Help for iTunes.

The screen may differ depending on the OS and software versions.

This unit supports AirPlay 2.
Sync multiple AirPlay 2 compatible devices/speakers for simultaneous

playback.

This unit supports AirPlay 2 and requires iOS 11.4 or later.

Router

This unit

138

Summary of Contents for AVR-A110





































































































































































































































































































































































Search results

Summary of Contents for AVR-A110

Reviews:

Related manuals for AVR-A110

Brands by name

Popular brands

Denon AVR-A110, Owner'S Manual

Search results

Summary of Contents for AVR-A110

Reviews:

Related manuals for AVR-A110

Brands by name

Popular brands