13
GUI Menu Map
Set
up
Pla
ybac
k
Inf
or
mation
ENGLISH
Audyssey
Audyssey MultEQ® XT
Audyssey MultEQ XT is a room equalization solution that calibrates any audio system so that it can achieve
optimum performance for every listener in a large listening area. Based on several room measurements,
MultEQ XT calculates an equalization solution that corrects for both time and frequency response problems
in the listening area and also performs a fully automated surround system setup.
Audyssey Dynamic EQ™
Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by
taking into account human perception and room acoustics. Audyssey Dynamic EQ works in tandem with
Audyssey MultEQ XT to provide well-balanced sound for every listener at any volume level.
Audyssey Dynamic Volume™
Audyssey Dynamic Volume solves the problem of large variations in volume level between television
programs, commercials, and between the soft and loud passages of movies.
Audyssey Dynamic EQ is integrated into Dynamic Volume so that as the playback volume is adjusted
automatically, the perceived bass response, tonal balance, surround impression, and dialog clarity remain
the same.
Manufactured under license from Audyssey Laboratories. U.S. and foreign patents pending. Audyssey
MultEQ® XT is a registered trademark of Audyssey Laboratories. Audyssey Dynamic EQ™ is a
trademark of Audyssey Laboratories. Audyssey Dynamic Volume™ is a trademark of Audyssey
Laboratories.
Other Information
Inf
or
mation
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
Symptom
Cause
Countermeasure
Page
When performing
the following
operations on a
connected device,
AVR-4308 / AVR-
3808 has the
same operations.
⋅
Power ON/OFF
⋅
Switching audio
output devices
⋅
Adjust volume
⋅
Switch input
source
• HDMI Control function is
operating.
• Set “Manual Setup” – “HDMI
Setup” – “HDMI Control” –
“Control” to “OFF”.
When you only want to operate
the power on/off each device, set
“Power Off Control” to “OFF”.
5
Troubleshooting
G
HDMI Control
H
Tr
oubleshooting
AVR4308ACI-3808ACI_E2A_2nd.indd 13
2008/08/25 10:13:43
