126
General
Setting items
Setting details
Notifications
Displays a notification
message on this unit’s
menu screen when the
latest firmware is released
with “Update”.
Display a notification
message on this unit’s
menu screen when
downloadable firmware is
released with “Add New
Feature”.
Update
: The notification message is displayed for about 20 seconds when
the power is turned on. Connect to broadband Internet (
)
when using this function.
•
On
: Display update message.
•
Off
: Do not display update message.
• When you press
ENTER
during display of the
notification message, the “Check for Update”
screen is displayed (Refer to
for
more information on “Update”).
• Press
o
or
BACK
to erase the notification
message.
Upgrade
: The notification message is displayed for about 20
seconds when the power is turned on. Connect to broadband Internet
(
) when using this function.
•
On
: Display upgrade message.
•
Off
: Do not display upgrade message.
• When you press
ENTER
during display of the notification message, the
“Add New Feature” screen is displayed (Refer to
information on “Add New Feature”).
• Press
o
or
BACK
to erase the notification message.
Setting items
Setting details
Add New Feature
Display new features that
can be downloaded to
this unit and perform an
upgrade.
NOTE
In cases where it is not
possible to connect to the
network after adding a
new function, connect to
the network again using
“Network” (
Upgrade Package
: Display the items to be upgraded.
Upgrade Status
: Display a list of the additional functions provided by
the upgrade.
Upgrade Start
: Execute the upgrade process.
When the upgrade starts, the power indicator becomes red and the menu
screen is shut down. During the upgrade, the amount of upgrade time
which has elapsed is displayed.
When upgrading is complete, the power indicator becomes green and
normal status is resumed.
• If the upgrade is not successful, an error message identical to those in
“Update” will appear on the display. Check the settings and network
environment and then perform the upgrade again.
See the DENON website for details about upgrades.
When the procedure is complete, “Registered” is displayed in this
menu and upgrades can be carried out. If the procedure has not been
carried out, “Not Registered” is displayed.
The ID number shown on this screen is needed when carrying out
the procedure.
The ID number can also be displayed by pressing and holding the main
unit’s
STATUS
and
TUNER PRESET CH –
for at least 3 seconds.
Notes concerning use of “Update” and “Add New Feature”
• In order to use these functions, you must have the correct system requirements and settings for a
broadband Internet connection (
• Do not turn off the power until updating or upgrading is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/
upgrading procedure to be completed.
• Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/
upgrading is completed. Furthermore, there may be cases where backup data is reset for the
parameters, etc., set on this unit.
• If the update or upgrade fails, press and hold the
X
on the main unit for more than 5 seconds, or
remove and re-insert the power cord. “Update retry” appears on the display and update restarts from
the point at which update failed. If the error continues despite this, check the network environment.
• Information regarding the “Update” function and “Add New Feature” will be announced on the DENON
web site each time related plans are defined.
• When usable new firmware is released with “Update” or “Add New Feature”, a notification message
is displayed on the menu screen. When you do not want to be notified, set “Notifications” – “Update”
(
) and “Notifications” – “Upgrade” (
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
DVD
