Denon AVR-2113, Owner'S Manual

Page: 123 / 156

120
Network
Settings
Default settings are underlined.
Make settings for wired LAN.
Only set “Settings” when connecting to a network without a DHCP function.
Setting details
Network
Information
IP Control
Friendly Name
Settings
Maintenance Mode
Selects how configure the network settings
q
Network/Settings
DHCP
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Proxy
Configure the network settings manually
Off
192.168.000.001
255.255.255.000
255.255.255.000
000.000.000.000
000.000.000.000
e
y
t
w
r
q
On the menu, select “Network” – “Settings” and press
ENTER
.
w
Use
ui
to select “DHCP”, then press
ENTER
.
e
Use
o p
to select “Off”, then press
ENTER
.
r
Use
ui
to select “IP Address”, then press
ENTER
.
•
IP Address
: Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.1 – 10.255.255.254
CLASS B: 172.16.0.1 – 172.31.255.254
CLASS C: 192.168.0.1 – 192.168.255.254
t
Use
uio p
to input the address and press
ENTER
.
y
Use
ui
to select setting item, then press
ENTER
.
•
Subnet Mask
: When connecting an xDSL modem or terminal adapter
directly to this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
•
Default Gateway
: When connected to a gateway (router), input its IP
address.
•
Primary DNS, Secondary DNS
: If there is only one DNS address indicated in the documentation
supplied by your provider, input it at “Primary DNS”. If there are two or more DNS addresses, input
the first one at “Secondary DNS”.
u
Press
o
or
BACK
.
The display returns to the original screen.
• When connecting to the network via a Proxy server, select “Proxy” and press
ENTER
( v page 121
“Proxy settings”).
Setting details
• If you are using a broadband router (DHCP function), there is no need to make the settings at “IP
Address” and “Proxy”, since the DHCP function is set to “On” in this unit’s default settings.
• If this unit is being used connected to a network without the DHCP function, the network settings
must be made. In this case, some knowledge of networks is required. For details, consult a network
administrator.
• If you cannot connect to the Internet, recheck the connections and settings ( v page 21 ).
• If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the
store from which you purchased your computer.
• When you want to cancel the setting during IP address input, press
o
or
BACK
.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
v
See overleaf
DVD