Denon AVR-2113, Owner'S Manual

Page: 110 / 156

107
Video
Setting items Setting details
Standby Source
Sets the HDMI input source
to put into standby when
the power is on.
Last : Enters standby with the previously used input source.
CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / CD : Enters
standby with each of the input sources assigned to each input terminal.
“Standby Source” can be set when “HDMI Control” is set to “On”.
Power Off Control
Links the power standby of
this unit to external devices.
All : If power to a connected TV is turned off independently of the input
source, power to this unit is automatically set to standby.
Video : If power to a connected TV is turned off when the input source
is Blu-ray / DVD / TV AUDIO / CBL/SAT / GAME / MEDIA PLAYER / AUX,
power to this unit is automatically set to standby.
Off : This unit does not link with power to a TV.
“Power Off Control” can be set when “HDMI Control” is set to “On”.
Output Settings
Default settings are underlined.
Makes screen-related settings.
z “Blu-ray”, “GAME”, “MEDIA PLAYER”, “CD” or “TV AUDIO” can be set when “HDMI” or “COMP”
( v page 111 , 112 ) has been assigned.
“Output Settings” can not be set when 4K signals are input.
Setting items Setting details
Video Mode
Make settings for video
processing.
CBL/SAT DVD
Blu-ray
z
GAME
z
AUX MEDIA PLAYER
z
CD TV AUDIO
z
Auto : Process video automatically based on the HDMI content
information.
Game : Always process video for game content.
Movie : Always process video for movie content.
• If “Video Mode” is set to “Auto”, the mode is switched according to the
input contents.
• If a source is played in both MAIN ZONE (audio and video) and ZONE2
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to “Game” mode may improve audio synchronization.
Setting items Setting details
Video Conversion
The input video signal is
converted automatically
in conjunction with
the connected TV
(
v page 6 “Converting
input video signals for
output (Video conversion
function)”).
CBL/SAT DVD
Blu-ray
z
GAME
z
AUX MEDIA PLAYER
z
CD TV AUDIO
z
On : The input video signal is converted.
Off : The input video signal is not converted.
• When a non-standard video signal from a game machine or some other
source is input, the video conversion function might not operate. In this
case set “Video Conversion” to “Off”.
• When “Video Conversion” is set to “Off”, the video conversion function
does not work. In this case, connect this unit and TV with the same type
of cable.
i/p Scaler
Convert the input source
resolution to the resolution
set.
CBL/SAT DVD
Blu-ray
z
GAME
z
AUX MEDIA PLAYER
z
CD NETWORK
TV AUDIO
z
Analog : Use i/p scaler function for analog video signal.
Analog & HDMI : Use i/p scaler function for analog and HDMI video signal.
HDMI : Use i/p scaler function for HDMI video signal.
Off : Do not use i/p scaler function.
• “Analog & HDMI” can be set for input sources for which an HDMI input
connector is assigned.
• Which items can be set depend on the input source assigned to each
input connector.
• This function is not effective when the input signal is “x.v.Color”, 3D,
sYCC601 color, Adobe RGB color, Adobe YCC601 color or computer
resolution.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
v See overleaf
DVD