ENGLISH
35
Advanced Operation
ENGLISH
Advanced Operation
Multi zone music entertainment system
• ZONE2 speaker out can be used when “ZONE2” is selected at “Power Amp Assignment”. In this case, surround back speaker out
cannot be used for MAIN ZONE.
• When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN
ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit.
• For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.
2
When using the SURR.BACK/ZONE2 amplifier as the ZONE2
• To use the ZONE2, turn on the
ZONE2
button.
• The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit’s
ZONE2 VOLUME
button.
•
The input source selected with the
INPUT SELECTOR
knob is output for the ZONE2 speaker output.
[System configuration and connections example]
Using this unit’s internal amplifier as the ZONE2.
This unit
DVD player
Input
RC-616
Monitor
MAIN ZONE 5.1-channel systems
ZONE2 SPEAKER OUT
SYSTEM REMOTE
CONTROL UNIT RC-1000
C
FL
FR
SL
SW
SR
B
RC-617
PROGRAMMABLE
REMOTE CONTROL UNIT
ZONE2
: SPEAKER cable
: ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line
Refer to “Connections” (
page 11).
Remote control unit operations during
multi-source playback (selecting the source)
1
Set the
MODE 1
switch to the “AUDIO”.
2
Set the
MODE 2
switch to the “ZONE2”.
3
Press the
ZONE2 ON
button.
To cancel the ZONE2 mode:
Press the
ZONE2 OFF
button.
MODE 2
MODE 1
ZONE2 ON
ZONE2 OFF
VOLUME
CHANNEL
4
The output level of the ZONE2 SPEAKER OUT
terminals can be controlled pressing the
VOLUME
button on the remote control unit.
Default setting (ZONE2 VOLUME LEVEL):
– – – dB (MINIMUM)
This is only possible when the main unit in the ZONE2 mode
(
page 16).
