Denon AVC-X6700H Owner'S Manual Download Page 259

Page: 259 / 342

General

Make various other settings.

Language

Set the language for display the menu on the TV screen.

English /

Deutsch

Français

Italiano

Español

Nederlands

Svenska

Pусский

Polski (Default : English)

“Language” can also be set up by the following operation. However, the menu

screen is not displayed. Watch the display while configuring the settings.

1. Press and hold the main unit’s STATUS and ZONE3 SOURCE at the same time

for at least 3 seconds.
“

Video Format <PAL>” appears on the display.

2. Press

on the main unit twice.

“

GUI Language <ENGLISH>” appears on the display.

3. Use the main unit’s

and set the language.

4. Press the main unit’s ENTER to complete the setting.

ECO

Configure the ECO Mode and auto standby mode settings.

ECO Mode

This mode can reduce the power consumption and heat generation of

this unit when power on.
This is done by reducing the power supply line to the power amplifier,

in turn the maximum power output.

259

Summary of Contents for AVC-X6700H






















































































































































































































































































































































Search results

Summary of Contents for AVC-X6700H

Reviews:

Related manuals for AVC-X6700H

Brands by name

Popular brands

Denon AVC-X6700H, Owner'S Manual

Search results

Summary of Contents for AVC-X6700H

Reviews:

Related manuals for AVC-X6700H

Brands by name

Popular brands