Denon AVC-X6700H Owner'S Manual Download Page 137

Page: 137 / 342

Adjusting the picture quality for your

viewing environment (Picture Mode)

Supported input sources :

CBL/SAT / DVD / Blu-ray / Game / AUX /
Media Player / CD

/ TV Audio

You can set the picture mode when an HDMI, component video or video

connector is assigned and “i/p Scaler” is set to anything other than “Off”.

(

p. 204)

Press OPTION.

An option menu screen is displayed.

Use

to select “Picture Mode”, then press ENTER.

The “Picture Mode” screen is displayed.

Use

to select the picture mode.

Off

(Default):

No picture quality adjustment is done

with this unit.

Standard:

The standard mode suited for most

living room viewing environments.

Movie:

A mode suited for watching movies in a

dark room such as a theater room.

Vivid:

A mode that makes graphic images for

games, etc. brighter and more vivid.

Streaming:

A mode suited for low bit rate video

sources.

ISF Day:

A mode suited for watching movies in a

bright room during the day.

ISF Night:

A mode suited for watching movies in a

dark room at night.

Custom:

Adjusts the picture quality manually.

Press ENTER.

“Picture Mode” settings are stored for each input source.

137

Summary of Contents for AVC-X6700H






















































































































































































































































































































































Search results

Summary of Contents for AVC-X6700H

Reviews:

Related manuals for AVC-X6700H

Brands by name

Popular brands

Denon AVC-X6700H, Owner'S Manual

Search results

Summary of Contents for AVC-X6700H

Reviews:

Related manuals for AVC-X6700H

Brands by name

Popular brands