DAEnetIP4
SNMP Five Channel Relay Module
- User's Manual
08 Aug 2017
-17-
7. Restart the module
The module may be restarted via one of the ways described bellow:
Unplug the power supply, wait 10 seconds and plug it again;
Move the jumper to
Reset Position
(Figure 21), wait 10 seconds and then get
it back to it's old position. This option is most suitable when the controller is
embedded in larger system and the JP5 jumper must be extended with
buttons or switches.
In order to do this procedure in BOX version, you have to remove the top
part of the housing before that!
