Denkovi DAEnetIP4, User Manual

Page: 10 / 17

DAEnetIP4 SNMP Five Channel Relay Module - User's Manual
08 Aug 2017
-10-
5. Installation
5.1. Connect

This device must be installed by qualified personnel;

This device must not be installed directly outdoors;

Installation consists of mounting the device, connecting to an IP network,
connecting the I/O, providing power and configuring via a web browser.
5.2. Power supply requirements
Figure 9. Location of DAEnetIP4 Five Relay Module power jack
The whole module has the following current consumption:

140mA at 24V DC (and all relays are ON)

210mA at 12V DC (and all relays are ON)
It is recommended the supply source for DAEnetIP4 Five Relay Module to be
with the following parameters:

Supply voltage: 12V or 24V DC (depending on the selected model);

Current: minimum 210mA;

It must be stabilized and filtered;