Denios VH-WSC Series, Operating Instructions Manual

Page: 35 / 84

Operation
35/84 Output 2022-08
5.3 Replacing the adapter plate
CAUTION
Warning! Risk of tipping!
Before replacing the adapter place, check the weight of the container you
wish to transport! Never exceed the indicated maximum load capacity, or
else there is a risk of tilting the drum lifter, as well as personal injury and
property damage!
The drum lifter is equipped with an adapter plate on the front of the vehicle, which is replaceable (see
section 6,
"Technical Data“). The adapter plate should be replaced, if the amount to be transported or
range must be adjusted. It can be removed via the six screws and replaced with a different adapter plate
(sold separately). The adapter plate does not require power supply for operation.
Only one adapter plate may be attached to the drum lifter at any given time.
Adapter plate Already attached to the
product Max. load capacity
(kg) Max. range (mm)
50 mm Adapter
(Item no.: 280741) Drum lifter 280739 350 130
180 mm Adapter
(Item no.: 280742) Drum lifter 280740 300 260
DE
EN
FR
ES