09-18
Mobile lifting table 004_INT
15 / 44
Safety instructions
Claims for defects and liability
DENIOS is not liable for claims for defects, damage or injury to persons or property caused by one or more of
the following:
Misuse
Incorrect assembly, commissioning, operation or maintenance
Non-observance of the notices in the operating instructions
Operation with defective safety equipment or safety and protective equipment which has been fitted
incorrectly or which is not in working order
Use of the product when defects or faults are present
Incorrectly conducted repair work
Vandalism
Catastrophe situations caused by the effect of foreign bodies and force majeure
Independent conversion of the product
2.1
Intended use of the equipment
The mobile lifting table is a device for the quick, smooth and precise lifting and lowering of loads. It may be
moved for short distances on an even surface, without a load. The height is adjusted by means of a hydraulic
foot pump and this allows a rapid and optimum adjustment of working height.
2.1.1
Misuse
The following are considered as not in accordance with the intended use:
Moving when loaded
Moving over uneven surfaces
Use in areas at risk of an explosion
2.2
Operator duties
No changes, extensions or modifications may be made to the product without the manufacturer's authorisation.
No liability is accepted for changes made without the manufacturer's authorisation and in such cases the
warranty will cease to be valid.
National directives and safety regulations must be complied with.
2.2.1
Before commissioning
Before commissioning, the locking screw (5, see section 3) on the top of the hydraulic cylinder must be replaced
by the supplied bleed screw with a perforated head.
2.2.2
Permanent obligations
The following are permanent obligations for the operator:
The accident prevention regulations are met
Misuse is prevented
Anyone who works with the product uses suitable protective equipment
Anyone who works with the product is qualified for his area of responsibility
Maintenance and service intervals are adhered to
Damage is repaired promptly and professionally
Only accessories approved by DENIOS and original replacement parts are used
