MERMAID E1100-I
STD00
Page 2 of 54
Operation Information
High Pressure Machine has
IP55
rating. Parking the machine outdoor will not pose any
damage to the machine. Ensure that the ventilation to the motor must not be blocked. During
operation, the machine must not park at an incline angle of 10deg. The machine will become
unstable and may endanger user. When hose is pull up to a high, pressure will drop due to
gravity.
This machine is designed to work with
clean fresh water only
.
Sea water is not advisable.
Life-span of the pump will be shortened. No chemical should be suck into the pump.
Prior to beginning work, all equipment must be inspected to ensure that it is in safe working
condition. Inspection shall include verifying the integrity of hoses and connections, tips,
lances. Personal protective equipment must be worn.
Prior to commencing any water blasting work, the area must be barricaded to restrict
unauthorized access.
We recommend to practice to employ 2 operators* blasting method. The role of the 2
nd
operator is to attend the pump unit keep close watch on the 1
st
operator for tiredness.
Therefore, the operators can take turns to operate the machine.
Operators must be trained on how to operate the machine (DENSIN) and the basic blasting
protocol before allow to use the machine.
How to prepare machine for usage
Correct way of holding the trigger gun for blasting due to the recoil force from the
trigger gun.
Understand how to operate the machine correctly.
Basic Maintenance and Troubleshooting.
******For Den-sin’s Training program available, please enquiry******
Version STD 00: Jan 2014
Revision
Rev.No.
IMPORTANT
that user read the manual guide to understand
the operation of the machine before usage.
NOTE
Summary of Contents for MERMAID E1100-I
Page 38: ...4 Spare parts list MERMAID E1100 I STD00 Page 37 of 54 Pump assembly ...
Page 46: ...4 Spare parts list MERMAID E1100 I STD00 Page 45 of 54 ...
Page 47: ...4 Spare parts list MERMAID E1100 I STD00 Page 46 of 54 ...
Page 53: ...5 Wiring Diagram MERMAID E1100 I STD00 Page 52 of 54 5 Wiring Diagram ...
